JVC BR-DE900 ProHD IP DECODER

Professional H.264/H.265 decoder suitable for portable or permanent installations. This versatile decoder incorporates two Gigabit Ethernet inputs, and two 3G/HD/SD-SDI, one HDMI, and one composite outputs. The BR-DE900 supports both Zixi or SMPTE 2022 Pro-MPE distribution, and streams at rates up to 10-bit, 4:2:2 1080p60.

FEATURES

  • Low-latency, hardware-based H.264 and H.265 decoding

  • Scaling, frame sampling, and de-interlacing for any stream to any output

  • Simultaneous dual 3G-SDI, HDMI2.0 and composite outputs

  • Any feed resolution/frame rate to any output resolution/frame

  • Stream-forwarding feature: decode Zixi protected stream (H.265 or H.264) over base-band video while forwarding

  • Sturdy, aluminum housing

This low-latency, hardware-based decoder offers scaling, frame sampling, de-interlacing, and real-time AES decryption for video, audio, and metadata. A stream-forwarding feature enables decoding of a Zixi-protected stream over composite (baseband) video while forwarding. Any input resolution/frame rate can be output at any resolution/frame rate.

Pair the BR-DE900 with a JVC camera for a bandwidth-efficient streaming solution over any network, or with the separately available JVC BR-800 Broadcaster streaming server. The compact BR-DE900 is housed in an aluminum housing sturdy enough for field use.

Network Protocols

  • UDP TS

  • RTP TS

  • RTP ES

  • Zixi error-correction (HEVC and H.264) - Zixi P2P and Broadcaster modes

  • RTP TS with ProMPEG forward error correction

Security and Management

  • Real-time AES decryption for video, audio, and metadata

  • Secure, web-based remote management interface (HTTPS)

  • Dashboard with detected channel characteristics description, and active outputs

  • Zixi streaming statistics for easier configuration

  • LED status displays for power, network activity, error, and streaming indications

  • Autostart mode recovers saved configuration after power cycling

  • Remote firmware and software upgrades via browser, and command line

  • Hardware push-button for restoring unit to factory settings

  • Recovery or initialization of Ethernet settings over USB thumb drive